Thingmagic Nomad RFID Setup Guide Manuel d'utilisateur télécharger pdf (Page 6)

6 Nomad RFID Reader Setup Guide

3. A plastic bag containing a sample RFID tag, One spacer, and an adhesive strip for the

bumper (#3 in the picture below)

4. A Quickstart Guide (not shown in the picture below)

Contents of the box

There is one plastic spacer in the plastic bag.

A. Spacer

The correct spacer you need depends on whether you have any other Nomad accessories.

1. If you don’t have a WWAN/GPRS modem, you need the Spacer

2. If you have a WWAN/GPRS modem, you don’t need any spacers.

WARNING: Make sure to identify the correct set of accessories and select the correct

spacers. Failure to do this could cause the Nomad RFID Reader to be installed incorrectly

and get damaged in the field.

NOTE: The following accessories are not compatible with the Nomad RFID Reader

1 2 3 4 5 6 7 8 9 10 11 ... 35 36

Pas de commentaire

Thingmagic Nomad RFID Setup Guide Manuel d'utilisateur Page 6